Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. AssemBle coVeR RAIls
A. Place a cover rail
(802695)
B. Slide the cover rails so they are approximately 8 inches up from the ground.
Middle Rib Cross Rail Clamps
802864
802695
07000
01011
End Rib Cross Rail Clamps
802864
13202
01011
07000
5. sqUARInG Up THe FRAme
A. Place frame in its final location, which needs to be as flat and level as possible.
B. Measure across opposite corners. These distances must be equal to within 1 inch.
C. Check that the front and rear of the frame measures 6 feet in width
between each leg and secure them with cover clamps as shown below.
Loosely HAND-TIGHTEN
noTe:
these connections.
13201
10115
802695
10115
802695
6ft.
6ft.
Page 6
05_70615_0B
Publicité
Table des Matières
