Technical Specifications - pelipal 54259 Mode D'emploi

Function
The sensor is an active motion detector, it emits high-frequency electro-magnetic wave ( 5.8GHz ) and receives their
echo. The sensor detects the change in echo from even the slightest movement in its detection zone. A microproces-
sor then triggers the „switch light ON" command. Detection is possible through doors, panes of glass or thin walls.
1. Light Sensor
2. Working-LED
NOTE: the high-frequency output of this sensor is <10Mw- that is just one 100th of the transmission
power of a mobile phone or the output of a microwave oven.

Technical specifications

Power supply: 12V DC (Sensor); 230V~ AC (Board incl. Transformer)
Installation situation: Indoors
HF-System: 5,8 GHz, CW-Radar, ISM-Band
Transmission power: <10 mW
Detection angle: 360°
Reach: 1-8 m (Radii), adjustable
Time setting: 10 s to 20 min
Light control: 2~2000 lux
Power consumption: ca. 0,9 W/h
Connection illumination
Important: Connection must be done by an electrician specialist!
1
2
< 10 mW
ca. 1000 mW
EN
5