Precautions Before Installation - Sams SND-7080F Guide De Prise En Main Rapide

InstallatIon

Precautions before installation

Ensure you read out the following instructions before installing the camera:
Select an installation site (ceiling or wall) that can endure at least 5 times of the

camera weight.
Stuck-in or peeled-off cables can cause damage to the product or a fire.

For safety purposes, keep anyone else away from the installation site. And put aside

personal belongings from the site, just in case.
disassembling
1.
Take the camera body with one hand and take the
top cover with the other hand. Then, turn the cover
counter clockwise to remove it.
Installation
1.
Use the provided template to drill one hole for
the camera, and one for the screw (5 mm in
diameter, at least 35 mm in depth), and insert
the plastic anchor (HUR 5) to the end of the
screw hole.
2.
Connect and arrange the necessary cables
lest that they should be damaged or twisted
while installing the camera.
3.
Insert the camera body into the hole so that it
fits to the camera hole, and fix the body using
the ASSY tapping screws (TH M4xL30). (x3)
4.
Refer to "Adjusting the monitoring direction for the camera" to adjust the lens in a
desired direction.
5.
Close the top cover.
Fit the top cover into the fixing tips of the camera body and turn the cover clockwise.
Top cover
Camera Body
English _