Spdif Output; Setting The Time; Setup Menu; Using The Sleep Timer - Samsung 5+ Serie Mode D'emploi

✎
When Speaker Select is set to TV Speaker
x
TV Speaker: On, External Speaker: On
✎
If there is no video signal, both speakers will be mute.

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
■ Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
■ Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.

Setup Menu

Setting the Time

¦
O
MENUm → Setup → Time → ENTERE
Time
■ Clock: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the INFO button.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
− Auto: Set the current time automatically using the
time from a digital channel.
✎
The antenna must be connected in order to set
the time automatically.
− Manual: Set the current time manually.
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute
and am/pm manually.
✎
Available only when Clock Mode is set to
Manual.
✎
You can set the Month, Day, Year, Hour, and
Minute directly by pressing the number buttons
on the remote control.
DST (Daylight Saving Time) (Off / On): Switches the
Daylight Saving Time function on or off.
✎
This function is only available when the Clock
Mode is set to Auto.
Time Zone: Select your time zone.
✎
This function is only available when the Clock
Mode is set to Auto.

Using the Sleep Timer

¦
O
MENUm → Setup → Time → Sleep Timer →
ENTERE
■ Sleep Timer: Automatically shuts off the
TV after a preset period of time (30, 60, 90,
120, 150 and 180 minutes).
✎
To cancel the Sleep Timer, select
Off.

Setting the On / Off Timer

¦
O
MENUm → Setup → Time → Timer 1→ ENTERE
You can set the TV to turn on automatically at a preset time.
■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock irst.
Timer 1
On Time
▲
00
Inactivate
▼
Off Time
00
Inactivate
Volume Source
20 TV
Repeat
Sun Mon
Once
L Move U Adjust
SLEEP
00 am
00 am
Antenna Channel
Cable 1
Tue Wed Thu Fri Sat
E Enter R Return
21
English