Anspach eMax 2 Mode D'emploi page 5

Symbols
Indicates the attachment setting, refer to MA-
DRIVER & MA-D20 section in this document for
further details
Indicates the drill tip exposure
Indicates position, alignment or location
Indicates position or location
Indicates action of rotation and position for
Secure (LOCK) and Release (UNLOCK)
Direction of rotation
Direction of rotation for lock position
Direction of rotation
Located on the Foot Pedal switch this indicates a
change of rotational direction for the handpiece
Located on the Console this indicates a change
of rotational speed rate for the Handpiece
Temperature Limits
Found on the Console ON/OFF
Located in the Console Irrigation Pump this
indicates a possible finger pinch point
Located on the Console Irrigation Pump these
symbols are not used by the user since the pump
is self-adjusting to the Irrigation Tube Diameter
Reference Number (A.K.A> Item Number,
Catalogue Number, Part Number)
Lot (A.K.A. Lot Number, Batch Number, Batch
Code)
Serial Number
Use By Date (A.K.A. Expiration Date, Expiry)
00/0000
Manufacturer
Authorized European Union Representative
Sterilized Using Irradiation
Located on the Console this indicates motor or
handpiece connector
Located on the Console this indicates Foot
Control connector
Located on the Console this indicates Hand
Control activation
Located on the Console this indicates Forward
(Clockwise rotation when looking at handpiece
from proximal end).
Located on the Console this indicates Reverse
(Counter-Clockwise rotation when looking at the
handpiece from proximal end)
Revolutions per Minute
1. Console Control Touch pad: indicates a
change state (on/off) for the Console Irrigation
System
2. Irrigation Pump: Indicates irrigation tube
direction towards the irrigation source
Located on the Console this indicates a change
of irrigation state for the Console Irrigation
System
Located on the Foot Pedal switch this indicates
a change state (on/off) for the Console Irrigation
System
Keep Dry (A.K.A. Protect from Moisture)
Sterile unless damaged or open
United States Federal Law restricts this device
to sale by or on the order of a physician or other
licensed health-care provider
CE Mark (A.K.A. CE Mark [Notified body
number], Conformité Européenne)
0086
Meaning: Device complies with applicable EEC
Directives
Lock (Run)
Unlock (Load)
Transmitter Interference may occur in the
vicinity of equipment marked with this symbol.
Type B Electrical Equipment
Product warranty is void if seal is damaged
or removed.
NO NOT DISPOSE OF IN HOUSEHOLD
WASTE
Single Use Only (A.K.A. Do Not Reuse)
CAUTION: Refer to accompanying
documentation
3