Table des Matières
Publicité
Step 2: When the indicator on the HUAWEI CPE starts to flash, press the H button on it. Wait
until the indicator on the router shows that the router is connected to the network.
Step 3: Place the router in a room with weak signal strength and connect the power supply.
• The figure is for reference only.
• Ensure that the HUAWEI CPE is connected to the Internet, and the router is new or restored to factory
settings.
• Ensure that the HUAWEI CPE supports the HUAWEI HiLink function and CoAP protocol. Please consult
the distributor for details.
• Ensure that the distance between your router and the HUAWEI CPE is less than 10 meters and there
are no more than two walls in between.
10
Publicité
Table des Matières
