Method Setup - Thermo Scientific Orion Star Guide D'utilisation

Meter Setup

Method Setup

The Orion 3-Star, 4-Star and 5-Star meters can save up to 10 methods when
the GLP function is enabled . When a method is selected, the meter will use the
last calibration performed in that method, so electrodes that share a common
meter connection can be more easily interchanged . When using multiple methods,
a calibration must be performed for each method that will be used .
1 . To enable the GLP function:
a . In the measurement mode, press
b . Press
c . Press
until
d . Press
until is displayed .
e . Press
f . Press
2 . To display and change the current method number:
a . In the measurement mode, press
be displayed .
b . Press
c . Press
measurement mode .
EN-18
/ until is displayed on top line .
to move the arrow icon to the middle line and press
is displayed .
to move the arrow icon to the bottom line and press
to move the arrow icon to the top line .
to exit the setup menu and return to the measurement mode .
/ to select a new method number .
to save the method number and press
Thermo Scientific Orion Star
.
. The current method number will
to return to the
and Star Plus Meter User Guide
™
/
/