Installation And Warning Notes - Mondial Framec DOLCE VITA Mode D'emploi Original

1 - INSTALLATION AND WARNING NOTES

CAUTION
THIS SYMBOL INDICATES THAT ONLY AUTHORISED AND TRAINED TECHNICIANS SHALL CARRY OUT THE
OPERATION:
Trained and skilled operator, aware of risks involved and responsible of adopting all measures necessary to minimise
any possible damage to himself and other people.
1. Remove the packaging from the equipment.
2. Check that the equipment has not been damaged during the transport.
3. Remove the wood pallet.
4. Clean up the equipment (inside/outside) as specified in PERIODIC MAINTENANCE.
5. Do not place the equipment outdoor and exposed to bad weather conditions: the external environmental conditions for proper
equipment operations are specified in the TECHNICAL DATA plate situated in the equipment rear side.
6. Put the equipment on a flat surface; for proper operation, the equipment shall be perfectly levelled: for this purpose, use the
adjustable feet.
7. Put the equipment in a ventilated place, far from heating sources (heaters, kitchens) and protected from sum beams. For the
installation area lighting, the use of fluorescent lights is recommended.
8. Leave a space of 10 cm from walls.
9. Do not leave objects on the equipment, such as containers, plants, etc. and leave at least 50 cm of free space above the
equipment.
10. Do not touch the operating equipment with bare feet or wet hands.
11. The use of this equipment by children or people with physical, sensorial, mental or motion disability, or people who do not
have the necessary knowledge and experience, could lead to dangerous situations. The people responsible for their safety
should give them explicit instructions or check the use of this equipment,
12. Make sure that children do not play with the equipment.
DO NOT MOISTEN ANY PART OF THE BOX CONTAINING ELECTRIC ELEMENTS.
DO NOT FORCE ANY PART CONTAINING COMPONENTS OF THE REFRIGERATING CIRCUIT.
DO NOT INSTALL THE EQUIPMENT IN ATMOSPHERES SUBJECT TO RISK OF FIRE OR EXPLOSION, OR
RAYS.
Check that the real mains voltage corresponds to the one specified in the technical data plate.
The power supply line/input for the refrigerator connection shall be properly protected and connected to the main
earthing system, according to the regulations in force (e.g. high-sensitivity magneto-thermal differential switch In =
16 A , Id = 30 mA).
An omnipolar disconnection device must be present on the electrical system with a contact distance of at least 3 mm.
THE EQUIPMENT EARTHING SYSTEM IS A SAFETY STANDARD REQUESTED BY THE LAW. OUR COMPANY
HAS ARRANGED THIS CONNECTION, ACCORDING TO THE REGULATIONS IN FORCE; THEREFORE, THE
COMPANY CAN NOT BE HELD LIABLE IN CASE OF DAMAGE TO PEOPLE AND PROPERTY.
Do not use reducing devices, multiple plugs or cable extensions; ensure that the electric installation and power
supply plug capacity comply with the regulations in force and they are indicated for the equipment power, according
to the data specified in the plate. In case of doubt, for the purpose of periodic check of general safety of equipment
and users, contact only qualified and professional technicians.
CAUTION
CONNECTION TO THE ELECTRIC MAINS
Page 12 | 47