Tronios Power Dynamics PDC150 Manuel D'instructions page 8

AUDIO
AUDIO OUTPUT
Here you set up the digital sound format that comes from the co-
axial or optical output on the back panel. This signal is used
when the unit is connected to a digital surround receiver.
OFF: Closes the digital outputs
RAW: Opens for the pure, non-modulated digital signal.
PCM: Stands for Pulse Code Modulation. It may be necessary to
activate this function if the digital surround receiver cannot
recognise the sound format.
MICROPHONE SETUP
Adjust the microphone setup.
PROLOGIC
Adjust the prologic sound modus.
ECHO
Adjust the echo effect of the microphone.
MICROPHONE VOLUME
Adjust the volume of the microphone.
8