Switching On / Off; Volume - Loc8tor Lite Mode D'emploi

ON
• Hold in the right hand side button (see Button Guide)
for 2 seconds. The Loc8tor will bleep and all the lights
flash.
• Small status light will flash whilst on.
• The Loc8tor will automatically power down after 45
seconds if left idle.
OFF
• Hold in the right hand side button for 2 seconds. Loc8tor
will beep and turn off.
Press in the left hand side button to select from three
volume settings; off, low and high. An audio beep will
sound when pressed indicating the current volume
level.
• Write on the sticky label provided which button is
allocated to each Tag / item.
• If a locate button is pressed with no Tag assigned to it
an error tone will sound and the status lights will blink
rapidly. To register a Tag to this button, complete the
steps 'REGISTER A TAG'.
6

SWITCHING ON / OFF

VOLUME

TIPS