Télécharger Imprimer la page

Installation; Mounting The Combi Heater; Electrical Wiring And Installation - Plug & Play MNC-23NS Manuel

Publicité

2.2.

Installation

2.2.1. Mounting the Combi Heater

It is recommended that the Combi Heater is mounted on the wall nearest to the door.
A mounting rack is provided for attachment of the heater.
For safety and convenience, follow the minimum safety distances as provided in Figure 4.
Do not install the heater on a niche in the wall or let it stand on the floor.
Do not install more than one heater, unless, you follow the special instructions for twin-heater
installations.
Make sure to build a strong foundation for the mounting rack (e.g. cross struts in the
sauna paneling), or reinforce the wall with a thick board to prevent the heater from
collapsing. Refer to Figure 4 (Minimum Safety Distances/Wall Mounting Rack Installation
Guide) on how to attach the mounting rack to the wall.
Secure the mounting rack to the wall with the screws that are provided.
To mount the heater to the rack, fit the nuts on its back to the slots provided on both sides of the
mounting rack.
Make sure to lock the side screws to prevent the heater from being accidentally moved.

2.2.2. Electrical Wiring and Installation

NOTE: Using a PVC-insulated wire as connection cable for the Combi Heater is
not allowed because this material easily becomes brittle when subjected to heat.
A certified electrician must do the installation of the Combi Heater to ensure safety and
reliability of the electrical connections.
Installation should be done in accordance to the applicable local regulations to ensure safety and
reliability of electrical connections. Wrong electrical connection can cause electric shock or fire.
The connection cable must be of rubber cable type, HO7RN-F, or its equivalent.
For further assistance, refer to the electrical diagram in Figure 5.
Abb. 5 Anschlussplan
Fig. 5 Electrical Diagram
MNC-30NS
MNC-36NS
To P'n'P Control
7
N
(230V 1N~)
R
Temperaturregler 1
1 =
R
Temperaturregler 2
2 =
R
Temperature Regulator 1
1 =
R
Temperature Regulator 2
2 =
R
2
H
H
H
1
2
S
R
1
W
N
U
L
L
1
2
1
No connection
L
Temperaturbegrenzer
=
H
Sauna-Heizelement
# =
H
Verdampfer-Heizelement
S =
L
Temperature Limiter
=
H
Sauna Heating Element
# =
H
Evaporator Heating Element
S =
L
m

Publicité

Chapitres

loading

Produits Connexes pour Plug & Play MNC-23NS

Ce manuel est également adapté pour:

Mnc-30nsMnc-36ns