Grounding Instructions; Wiring Diagram - Dustbane PC-3 Manuel D'opération

Grounding Instructions

IMPORTANT: Improper grounding method can result in a risk of electrical shock. The machine must be grounded.
PC-3 vacuums must be connected to a properly grounded outlet only. If it should malfunction
or breakdown, grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. Dustbane PC-3 vacuums are equipped with a cord having an
equipment-grounding conductor and grounding plus. The plug must be inserted into an
appropriate outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
WARNING: Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or service person if you are in doubt as to whether
the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will
not fit the outlet, have a proper outlet installed by a qualified electrician. RATED LESS THAN 15
AMPERES AND INTENDED FOR USE ON A NOMINAL 120-VOLT SUPPLY CIRCUIT: the PC3 vacuums
have a grounding attachment plug that looks like the plug illustrated above. Make sure that the
vacuum is connected to an outlet having the same configuration as the plug. No adaptor should
be used with these vacuums.
NOTE: THIS EQUIPMENT SHALL NOT BE USED WITH ANY EXTENSION CORD.

Wiring Diagram

GREEN
VERT
VAC MOTOR
MOTEUR DE
L'ASPIRATEUR
PC-3
Vacuum Operating and Maintenance Instructions
General
These vacuum cleaners have been designed to give long and trouble free service. The materials used in their manufacture have
been chosen to provide you with top performance at a reasonable cost. To help you realize maximum, economical performance
at all times and to protect your investment, it is necessary that these vacuums be maintained properly. Therefore, to gain these
benefits, it is recommended that you follow the instructions listed below. Responsibility for safe delivery was assumed by the
Transporting Carrier who delivered your machine. Any claim for loss or damage that may have occurred in transit, must be noted
on Transportation Receiving Slip and immediately reported to your local distributor.
4
Parts & Operations Manual
BLACK
NOIR TOGGLE SWITCH
INTERRUPTEUR
À BASCULE
WHITE
BLANC BLACK
NOIR
WHITE
BLANC
GREEN
VERT CABLE ASSEMBLY
ASSEMBLAGE DU BOYAU
SHROUD
GRILLE
PC-3
GROUNDING INSTRUCTIONS
DIRECTIVES DE MISE À LA TERRE
GROUNDED OUTLET
PRISE DE COURANT
GROUNDING PIN
BRANCHE DE MISE À LA TERRE