Updating The System; Setting Menu Items; Displaying The Menu Screen; Setting Screen - JVC KW-V50BT Mode D'emploi

SETTINGS
❏ Updating the system
You can update the system by connecting a USB
device containing an update file.
• To update the system, visit <http://www.jvc.net/
cs/car/>.
1
Create an update file, copy it to a USB
device, and connect it to the unit.
• To connect a USB device, see page 48 .
2
Display the <System Information>
screen.
On the Home screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
3
<Application Updates the system
Version> application.
<System Version> Updates the system.
<Bluetooth Updates the Bluetooth
Version> application.
It may take a while.
If the update has been completed successfully,
"Update Completed" appears. Reset the unit.
• To finish the procedure, press [
• If the update has failed, turn the power off and
then on, and retry the update.
• Even if you have turned off the power during the
update, you can restart the update after the power
is turned on. The update will be performed from
the beginning.

Setting menu items

❏ Displaying the <Setup> menu screen
❏ <Audio> setting screen
<Fader/Balance>
Fader: Adjust the front and rear speaker output
balance.
• F6 to R6 (Initial: 0)
]. – When using a two-speaker system, set the fader
to the center (0).
Balance: Adjust the left and right speaker output
balance.
• L6 to R6 (Initial: 0)
Press [J]/[K]/[H]/[I] or drag [
– To clear the adjustment, press [Center].
<Equalizer>
Change the sound mode or adjust and store the
equalization for each source. (Page 36)
• Flat (Initial)/Natural/Dynamic/Vocal Boost/Bass
Boost/Vibrant/User
<Loudness>
You can activate/deactivate loudness.
• On (Initial): Boost low and high frequencies to
produce a well-balanced sound at a low volume
level.
• Off: Cancels.
<Crossover>
Adjust the crossover frequency. (Page 37)
<Volume Adjust>
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD/DVD-VR/
VCD, CD, and DivX/MPEG1/MPEG2/MP3/WMA/WAV.)
The volume level will automatically increase or
decrease when you change the source.
• –15 to +6 (Initial: 00)
<Speaker Selec t>
Select the size of the connected speaker.
• Standard (Initial)/Narrow/Middle/Wide
] to adjust.
ENGLISH 41