Sound Adjustment; Using The Sound Equalization - JVC KW-V50BT Mode D'emploi

SETTINGS
Sound ad justment
❏ Using the sound equalization
• The adjustment is memorized for each source until
you adjust the sound again. If the source is a disc,
the adjustment is stored for each of the following
categories.
– DVD/DVD-VR/VCD
– CD
– DivX/MPEG1/MPEG2/MP3/WMA/WAV
• You cannot adjust the sound when the AV source
is turned off.
Selecting a preset sound mode
1
Display the <Equalizer> screen.
On the Home screen:
• You can also display the <Equalizer> screen
by pressing [ ] on the <Function Menu>
screen. (Page 7)
2
Select a sound mode.
• You can change the page to display more
items by pressing [J]/[K].
36
Storing your own adjustment—Customizing
preset sound mode
1
Select a sound mode. (See the left column.)
2
Adjust the level of each band (1), then
select the subwoofer level (2).
The adjustments are stored and <User> is
activated.
• To finish the procedure, press [
Storing your own adjustment—Adjusting the
sound precisely
1
Select a sound mode (see the left column),
then...
2
Select a band.
3
Adjust the sound.
<Reset>
<Freq>
<Q>
<Bass>
<SW Level>
].
The adjustments are overwritten if the <User>
setting has been created (see the left column),
and <User> is activated.
• To finish the procedure, press [
• The adjustments are memorized until you adjust
sound again.
• To make adjustment for other bands, repeat steps
2 and 3.
1
* Fixed for "High" band.
2
* Only for "Low" band.
Changes the level of each band
(Low/Middle/High) to "0".
Selects frequency.
Adjusts the width of the
frequency.* 1
Activates/deactivates bass.* 2
Adjusts subwoofer level.
].