Step 7 Position Refrigerator And Install Top Trim - Monogram ZKBSN720NSS Instructions D'installation

STEP 7 POSITION REFRIGERATOR AND INSTALL TOP TRIM

• Before pushing the refrigerators into the
opening, plug the power cords into the
receptacles. Reach into the top opening
to grasp the power cord. Pull the power
cord into the opening as you push the
refrigerator back.
• With hands against front corners,
push one refrigerator part-way into the
opening. The refrigerator should be
wall.
• Gently push the second refrigerator next
to the other. The doors should be flush to each other
and the inside trims together.
• Install corner bracket (K) into each side of the top trim
(A). Use 4 screws (M) if needed.
• Place the top trim across the top of the refrigerators
and slip the corner brackets into the outside case
trims.
31-1000414 Rev. 1
INSTALLATION INSTRUCTIONS
Corner Trim
Bracket
• Install 8 screws (I) through the top of the trim and into
the top case.
Soffit
• Check to be sure the inside trims are aligned top and
bottom. There should be a slight gap between the
case trims.
• Remove the Grill Base wraps. 6 screws will be
removed from each grille base wrap. Keep the screws
for future steps.
PUSH REFRIGERATOR INTO OPENING
NOTE: 2 PEOPLE ARE REQUIRED TO PUSH THE
UNIFIED REFRIGERATORS INTO THE OPENING.
• With hands against the front corners, gently push the
unified refrigerators into the opening or against the
back wall.
9