Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2. System Installation
Tech Specs:
HP
LS40
½ (x2)
LS60
¾ (x2)
Tools Required:
• Placement Rope
• Level
• Small stone or gravel
• Rake
• Permanent Marker
STEP ONE:
Select a Location for the Aeration Cabinet
• Locate cabinet on a solid surface with adequate strength for the weight of the unit.
• Locate cabinet away from irrigation sprinklers.
• Cabinet must always remain above the high water mark.
Ý Attention: For airline that runs longer than 100' , connector kits are required (sold separately). See Page 9.
Pond's Edge
If a power source is available near the pond's
shore, locate the cabinet at the pond's edge for
quicker installation.
STEP TWO:
Prepare the Ground Surface and Place the Cabinet
4
Running
Volts
Amps
8.2 or 4.1
115V or 230V
10.6 or 5.3
115V or 230V
• Utility razor knife
• Boat/Raft/Swimsuit
• Shovel
• Flathead screwdriver
• Coast Guard-approved life jacket
Option A
Away from
Pond's Edge
If a power source is not available near the pond's
shore or you would prefer to install the cabinet
in another location, install Direct Burial Airline(s)
(sold separately) from the cabinet's location to
the pond's edge.
Max CFM
Power Cord
9.4
6'
11.6
6'
See Video Instructions of the
Airmax
Aeration System installation online at
®
airmaxeco.com/LakeSeriesAeration
Option B
1. Place the cabinet on the ground in the selected location and mark an area 6"
wider than the base of the cabinet on all sides.
2. Move the cabinet and remove the sod from the area. Then dig a
hole approximately 13" x 18" x 6" for the junction box.
Max Pond
Max Depth
Size
5 Acres
50'
6+ Acres*
50'
*Ponds greater than 6 acres require multiple systems
Option B
with Remote Manifold
Use a single airline from cabinet to shoreline
with valves at pond's edge.
Learn about installing an optional
Remote Manifold Kit online at
airmaxeco.com/RemoteManifold
ENGLISH
# Diffusers
4
6
Publicité
Table des Matières
