Regarding
cleaning, refer to the following
paragraph in this manual.
SPECIAL SAFETY INSTRUCTIONS:
Use only cold water when filling the device.
The water in water tank must not go over the
maximum limit. The water level must be between
the marks MAX and MIN.
Switch the kettle off before removing it from the
base.
Always ensure that the lid is tightly closed.
The kettle is only to be used with the stand
provided. This stand can't be used with another
kettle.
The base and exterior of the kettle are not water-
resistant, keep it dry at all times.
USE OF THE APPLIANCE
First use
• Before using the kettle for the first time, fill the kettle with cold water and boiled it twice
without any additives.
Use of the kettle :
1. Open the lid in order to fill in the kettle.
2. Fill the kettle only with cold water and respect the water level indicator (MIN-MAX).
Warning : If the kettle is overfilled, boiling water may be ejected.
3. Close the lid by pushing slightly until the lid is locked.
4. Place the kettle on the base and connect it to the socket.
5. Lower the switch. The LED light on the water indicator shows that the water is being
boiled.
6. After boiling, the kettle switches off automatically. Disconnect the kettle from the mains
electricity supply. Do not open the lid when pouring.
the
instructions
9
for