Marmitek Sense SE Guide D'installation Rapide page 2

Safety Instructions
Please read these instructions thoroughly before you
use the device and keep them for future reference.
Only for indoor use.
• Do not expose the product to extremely high or low
temperatures, strong light sources or direct sunlight.
• This product is not a toy. Keep out of reach of
children.
• Dispose of batteries as chemical waste. Remove the
batteries when you are not using the system for a
longer period of time. Check the polarity (+/-) of the
batteries when inserting them in the product. Wrong
positioning can cause an explosion.
• Never open the product: the device may contain parts
with deadly voltage.
• Repairs or service should only be performed by
qualified personnel.
Requirements
This product requires a stable working Wi-Fi network
(username/ password) connected to the internet.
Installation of the Smart me app
Download and install the Marmitek Smart me app from
the Apple app store or the Google Play store.
Launch the Smart me app after installation is completed.
Follow the instructions and register for a new account.
Installation of the Sense SE
• Open the Smart sensor housing and pull the plastic
battery strip to activate the battery.
• The light indicator light should start flashing quickly. If
it's not flashing, push the reset button for 5-6 seconds
until it begins flashing.
• Launch the Smart me app from your smart phone or
tablet.
• Click on the + (upper right corner) to add a new
device, confirm if the light bulb flashes quickly and
follow the instructions.
• Press Help button during installation for more
information or when installation fails.
Notes for using the product
• After the installation is completed you can configure
the Smart sensor by using the app.
• Check our website
www.marmitek.com
details and how to use the Smart me products.
Technical specifications
Detection
Detection range
Detection angle
Trigger delay
Battery life
Standby life time
Wireless technology
Power
Standby power
Dimensions
Declaration of Conformity
Hereby, Marmitek BV, declares that the
Sense SE is in compliance with the essential
requirements of the 2014/53/EU Directives.
Full Declaration of Conformity is available at
www.marmitek.com/en/declarations-of-conformity/
More detailed user guide and instructions are available
on our website at
www.marmitek.com
for more
Motion
7 meter
110 degrees
~ 3 seconds
1 year @ 25 p/day
2 year @ 10 p/day
5 years
Wi-Fi 2.4GHz
Battery CR123A
20uA
48 x 48 x 65 mm