Power; Picture; Sound - Hisense 40H5500F Manuel D'utilisation

ENGLISH FRANÇAIS
• Depending on the connected HDMI device, the HDMI-CEC Control feature may not work.
CEC Device List: You will see the CEC devicel list If the TV access CEC device.

Power

Sleep Timer: Set the sleep timer to automatically turn the TV off within a specified time: off, 10 Minutes, 20 Minutes,
30 Minutes, 40 Minutes, 50 Minutes, 60 Minutes, 90 Minutes and 120 Minutes.
Picture off: When you select this option, the screen will not display the picture. You can only listen the audio. Press
any button except the [
Switch off Timer: Set the timer to automatically turn the TV off within a specified time: off, 30 Minutes, 60 Minutes, 90
Minutes, 120 Minutes, 150 Minutes, 180 Minutes, 210 Minutes and 240 Minutes.
No Signal Auto Power Off: You can set how long after no signal, the TV will automatically shut down.

Picture

Picture Mode: If you'd like to configure the settings for your picture, then there are seven types of picture modes
available: User, Standard, Vivid, Sport, Movie, Game, and Energy Saving
Auto BackLight: You can set to Off, Low, Middle or High.
BackLight: Adjust Local Dimming, Backlight Level, Automatic Light Sensor and Minimum Backlight to change the
overall brightness of the screen.
Brightness: Adjust the Brightness level to generate lighter or darker images.
Contrast: Adjust the Contrast level to increase or decrease how bright images appear.
Saturation: Adjust the saturation of color settings.
HUE: Adjust the hue of color settings.
Sharpness: Adjust how sharp or soft edges of images appear.
Color Temperature: Select a preset color temperature. Adjust how warm(red) or cool(blue) the white areas of an
image appears.
Advanced Video: Advanced settings for video.
Color Tuner: Adjust the color tuner settings.
11 Point White Balance Correction: Adjust the intensity of red, green and blue lights to view the true colors of all
images in the picture.
Reset to Default: Reset current picture settings to factory mode.

Sound

System sounds: Turn on or off the default system sound.
Select formats: Use the formats that your device reports supporting (recommended).
Sound Style: Select a preset sound mode to suit the type of content you are listening to: User, Standard, Vivid,
Sports, Movie, Music, News.
Balance: Adjust the left and right speaker strength to optimize audio for a specific location.
Equalizer Detail: Boost the volume at different frequencies.
ARC: Select the speakers to ARC on or off.
Digital Output: Select the digital audio output format that best suits the audio device type. Choose PCM if you have
an amplifier that does not support Dolby Digital technology.
SPDIF Delay: Adjust SPDIF Delay.
Auto Volume Control: Turn ton or off the Auto Volume Control.
DTS-StudioSound: Enable DTS-StudioSound.
Reset to Default: Reset current audio settings to factory mode.
ESPAÑOL
] button, Volume [+/-] buttons and [ ] button to restore operation.
22