General Information - Lupine PENTA Mode D'emploi

General information

Button to operate
the red LEDs
Button to operate
the white LEDs
Charge by USB C
Key lock
By pressing both buttons at the same time for abour 3sec., key lock is
activated. To confirm that, one red LED will light up once. Same procedure
to deactivate key lock, it will be confirmed by a single white LED lighting
up once.
Turn on
The first press of the button switches on the light.
Switching
Each quick push of the button switches through the light settings.
Light settings
White LEDs
0.35 W Diffuse + Spot + Main
1 W Diffuse + Spot + Main
3 W Diffuse + Spot + Main
6 W Diffuse + Spot + Main
Turn off
To turn off the lamp, keep button pressed.
Operation
Red LEDs
0.35 W Diffuse + Spot
0.8 W Diffuse + Spot
1.6 W Diffuse + Spot
3 W Diffuse + Spot