TRENDnet TEW-455APBO Guide D'installation Rapide page 19

Troubleshooting
How do I configure TCP/IP settings on my computer?
Windows Vista
1. Go into the Control Panel, click Network and Internet,
click Network and Sharing Center, click Manage
Network Connections and then right-click the Local
Area Connection icon and then click Properties.
Windows XP/2000
1. Go into the Control Panel, double-click the Network
Connections icon and then right-click the Local Area
Connection icon and then click Properties.
I am using a non-Windows based computer. How do I configure IP Address and Wireless
settings on the Access Point?
1. Assign your computer a static IP Adress of 192.168.10.x (where X is an available address
from 1 to 254. Since the IP address of the TEW-455APBO is 192.168.10.100, do not
assign your computer a static IP address of 192.168.10.100.
2. Follow all the steps in Section 3 Configure the Access Point to configure the IP and
Wireless settings on the Access Point.
I changed the password on the Access Point, but I can no longer login. What should I do?
Reset the unit using the following procedure.
1. Press on the reset button. The reset button is located next to the LEDs.
2. Wait 10 seconds, then let go of the reset button.
The default user name and password is root
2. Click Internet Protocol Version 4(TCP/IPv4)
and then click Properties. Then click on Use the
following IP address, and make sure you
assign your network adapter an IP address in
the subnet of 192.168.10.x.
2. Click Internet Protocol (TCP/IP) and then click
Properties. Then click on Use the following IP
address, and make sure you assign your
network adapter an IP address in the subnet of
192.168.10.x.
17