TUBES ASTRO Manuel D'utilisation page 17

tionally, there are features that can be
used only via app and these are listed
below:
• Temperature Control
NB: this can only be used via the
TUBES Plug&Play App.
Astro's heating temperature can only
be controlled via the TUBES Plug&Play
App. All you need to do to set the desi-
red temperature is to move the cursor
along the temperature control bar on
the Astro home page. When the set
temperature is reached, Astro remains
in maintenance mode, that is it keeps
the room at the set temperature (auto-
matically switching the resistances on
and off according to the temperature
measured).
Remember that the temperature set via
the app remains stored and the device
will be automatically set to that tem-
perature every time it is switched back
on again. The only way to change the
temperature without the app is to use
the reset to factory settings procedure,
which restores the temperature, open
window detection and weekly program-
ming to their original settings.
• Automatic Mode(Weekly Program-
ming) NB: this can only be used via
the TUBES Plug&Play App.
The Automatic Mode allows you to
pro¬gramme the heating in advance
(24 hours a day and 7 days a week) to
maximize comfort in your home and
reduce energy wastage even when you
are away from home. More specifically,
it allows you to set the times when you
want to turn the heating on and offe-
very day of the week.
To access Weekly Programming with
the app, click the extra features icon at
top right and select "Weekly Program-
ming". Select the times of day when
you want the heating to be turned on.
A white circle around the selected time
shows when heating is set to be tur-
cod. MAN#AST - Settembre/September 2019
ned on. Then enable the "Automatic.
Mode".
During the times when heating is on,
Astro operates at medium power
(mo¬derate flow) to reach the room
tem¬perature set on the home page.
When Weekly Programming is set via
app, the MODE control
YELLOW.
When the temperature set for the
programmed time period is reached,
Astro does not switch off, but remains
in maintenance mode (automatically
switching on and off according to the
detected temperature) while only venti-
lation remains in operation at the times
when the heating is set to off.
• Open Window Detection
NB: this can only be used via the
TUBES Plug&Play App.
When the device detects a sudden drop
in temperature (presumably because
a door or a window has been opened)
the heating is temporarily switched
off for 30 minutes or until the room
temperature starts to rise again.When
an open window is detected, the LED
on the MODE key
colour corresponding to the selected
mode of operation.
To use this feature with the app, click
the extra features icon at top right and
select "Open Window Detection".
• Identify Device
NB: this can only be used via the
TUBES Plug&Play App.
This feature allows you to locate a devi-
ce when lost or to identify a specific de-
vice when it is placed in a room where
there is more than one device remotely
programmed via the TUBES Plug&Play
app.
By enabling this feature, the device can
be recognised because it emits 4 beeps
and the two LEDs flash simultaneously.
To use this feature with the app, click
becomes
lflashes with a
17