Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Repair Information
Repair Information
If a repair becomes necessary on your LiteKeeper® unit,
please refer all service to Greengate's technical support line
at 1-800-553-3879. Should you be directed to return your
logic board to the factory for service please follow the
steps below.
1.
Label all wiring.
2.
Put the relay override switch on the SOC to the ALL
ON position.
3.
Unplug the Logic Board power wiring.
8
LiteKeeper® Logic Board (16/32)
4.
Remove input terminal blocks, Digita® switch
connections, and TB3 power terminal block
connections, if used.
5.
Disconnect relay ribbon cable from the Standard
Override Card.
6.
Unlatch upper spring hinge to swivel logic board down.
7 .
Release both spring hinges at sides of logic board and
remove board.
8.
Package the logic board carefully for shipment
to factory.
WARNING: Damage Caused by improper packaging will
not be covered by warranty.
Publicité
Table des Matières
