Safety During Operation; Preparing For Use - Wella SAHIRA COLOR Mode D'emploi

Sahira color.book Seite 21 Donnerstag, 24. November 2011 3:55 15
Technical Customer Service of Wella to ensure perfect func-
tioning and safety.

Safety during operation

DANGER:
• Do not direct the air flow towards eyes, hands or
other areas sensitive to heat.
• Danger of burns! Do not touch the hot surfaces of the appli-
ance.
• Lay the cord in such a way that nobody can trip over or
tread on it.
• If a problem occurs during use, pull out the mains plug
immediately and send the appliance to the Technical Cus-
tomer Service.
• Always use the original styling nozzle only.
• For technical reasons no attachments must be used with
the Sahira Color that are pushed onto and fastened to the
outside of the appliance.
Cleaning and storage
DANGER:
• Risks also exist even when the appliance is
switched off. Disconnect the hand hairdryer
from the mains each time after operation, and
also before cleaning.
• Allow your hairdryer to cool down before you clean it or
put it away.
• Never use pointed objects (e.g. the tail of a comb) to
remove dust or foreign bodies from inside the appliance.
There is a risk of electric shock.
• Under no circumstances use aggressive or abrasive clean-
ers.
• Do not wind the cord round the appliance (risk of damaging
the cable).

2 Preparing for use

• Carefully unpack the Sahira Color
supplied.
• Check the appliance and cord for any damage. Do not use
the appliance if it is damaged.
• Before connecting the
mains, make sure that the mains voltage
corresponds to the voltage specified on
Rating the rating plate 4. You will find the rat-
plate
ing plate below the air inlet opening.
and the styling nozzle
Sahira Color
to the
21