Télécharger Imprimer la page

Omnilux E-27 Guide Rapide page 2

Publicité

Les langues disponibles

Les langues disponibles

Every person involved with the installation, operation and maintenance of this lamp has to:
- be qualilfied
- follow the instructions of this manual
Safety instructions / Operating determinations
This lamp has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes mentioned below.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems.
If the lamp has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on
immediately. The arising condensation water might damage your lamp. Leave the lamp switched off until it
has reached room temperature.
Make sure that the available voltage is not higher than stated on the lamp.
Do not shake the device. Avoid brute force when installing or operating the device.
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
This lamp is only to be used in a device operating with an alternating voltage of 230 V, 50 Hz with
ballast resistor. This lamp is designed for professional use on stages, in discotheques, theatres etc.
Caution: The lamp must only be operated in an upright position. Do only install the luminaire vertically!
After you connected the lamp to the mains, the lamp needs 3-4 minutes warm-up time until it reaches full
lighting output.
Caution: During the operation, high ultraviolet radiation is emitted around the lamp!
Caution: During the operation, the lamp body becomes very hot.
Do not switch the device on and off in short intervals as this would reduce the lamp's life.
If this lamp will be operated in any way different to the one described here, this may lead to dangers like
short-circuit, burns, electric shock, burns due to ultraviolet radiation, lamp explosion, crash etc.
UV illuminants are hazardous waste which needs to be disposed of appropriately.
Please dispose of the unusable UV illuminants in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.
Please note: Every information is subject to change without prior notice. 26.02.2013 ©
Technische Daten/Technical Specifications/Caractéristiques techniques/Especificaciones técnicas
Nennleistung/Rating/Puissance/Pot. nominal:
Sockel/Socket/Douille/Casquillo:
Lebensdauer/Lamp life/Durée de vie/Vida:
OMNILUX
E-27/E-40 UV lamp
No. 89512005
125 W
E-27
ca. 2500 h
2/4
No. 89513505
No. 89514005
250 W
400 W
E-40
ca. 2500 h
ca. 2500 h
00024192, Version 1.4
E-40

Publicité

loading

Ce manuel est également adapté pour:

E-40895120058951350589514005