Publicité
Les langues disponibles
Les langues disponibles
4. Overspeed value setting
Press "MENU" and lighten
in red, start setting by press "SET". Press
or
to
revise value, finish setting by press "SET". Overspeed value range is 60~195km/h, and should
be bigger than Attention Speed Value.
5. Attention value setting
Press "MENU" and lighten in yellow, start setting by press "SET". Press to revise value, finish
setting by press .
or
. Attention speed value is 40~195km/h, and should be smaller
than overspeed value.
HUD connection
HUD screen installation
Turn on the power, then seek the best position of reflecting film and HUD screen. The
method is similar to sticking window film. Spraying some soap water on the windshield,
remove two sides protective tape covered on the reflecting film carefully, then sticking the
film at a suitable position on the inside of windshield. Remove unnecessary bubble or
moisture, do not leave the air bubble and the fingerprint.
Place the HUD screen in a suitable location, ensure the lightest projection on the windshield,
please see picture 6.
Publicité
