Camera Settings - CAME 848CA-0080 Guide Rapide D'installation

CAMERA SETTINGS

Access to the camera
The network video camera's default IP address is 192.168.5.190.
The default user name is admin and the password is ms1234.
Changing default IP address
The Smart Tools software lets you change the camera's IP address.
Connect the camera to the same LAN as the computer.
Smart Tools can automatically detect the network cameras connected to the LAN, set the IP addresses and
manage firmware updates.
When IP address are assigned to different cameras, it is recommended that this software be used.
Step 1: install Smart Tools.
Step 2: open Smart Tools and the information relating to all the network cameras will be displayed, including
IP address, MAC address, port number, network mask and gateway.
Step 3: select one or more cameras according to MAC address.
Step 4: key in the user name and password (if different from default settings).
Step 5: change the IP address or other network parameters and click the "Modify" button.
Step 6: check that the IP address is correct.
Step 7: double-click on the camera selected to access the camera directly from the web browser. The Internet
Explorer window opens.