Cleaning & Storage; Warranty And Support - Philips Lumea BG9041 Mode D'emploi

Cleaning & storage

Warranty and support

-
The charging light flashes white to indicate that the appliance is
charging.
-
When the batteries are fully charged, the charging light lights up white
continuously.
Notes: The adapter and the device feel warm during charging. This is
normal.
Note: This device is equipped with battery-overheat protection and does
not charge if the room temperature exceeds 40 °C.
-
Never cover the appliance and device during charging.
3 After charging, remove the adapter from the wall socket and pull the
small plug out of the device.
Note: The battery functionality is not enough for a full body treatment. We
recommend you to use the device attached to the wall socket while treating
large body areas such as shoulders, chest, back and legs.
Tip: Charge the device after each use to save battery life.
1 After use, switch off the device, unplug it and let it cool down.
Note: Light exit window and the attachment can become very hot after
usage.
2 Remove the attachment.
3 Moisten the soft cloth supplied with the device with a few drops of water
and use it to clean the following parts:
-
the light exit window on the device
-
the outside surface of the attachment
-
the reflector inside the attachment
-
the skin tone sensor window
4 Let all parts air dry thoroughly.
5 Store the device in a dust-free place at a temperature between -25 °C to
+70 °C and a humidity range between 15-90 %.
If you need information or support, please visit www.philips.com/support or
read the international warranty leaflet.
English
25