Accessories; Manufacturer's Warranty - STEINEL PROFESSIONAL GluePRO 300 Mode D'emploi

Accessories

Your retailer keeps a stock of accessory nozzles.
Nozzles
1. Long nozzle, 3 mm
Prod. No. 052737
2. Long nozzle, angled, 3 mm
Prod. No. 052744
3. Long nozzle, fine, 1.5 mm
Prod. No. 052928
4. Long nozzle, large, 4.5 mm
Prod. No. 052935
Glue sticks
1. General-purpose glue sticks,
300 mm, 600 g
Prod. No. 050092
2. Acrylate glue sticks, 300 mm, 600 g
Prod. No. 052416
3. Fast glue sticks, 300 mm, 600 g
Prod. No. 052430
4. Flex glue sticks, 300 mm, 600 g
Prod. No. 052423
5. Low Melt glue sticks, 300 mm, 600 g
Prod. No. 052409
GluePRO 400 LCD status indicators and error messages
Display Heating Cause
element
"­ ­ ­" LOC function
activated
"Err". Warm Maximum tempera-
ture exceeded
"Err". Cold Sensor short circuit
or sensor break
GluePRO 300 fault indication
The LED on the GluePRO 300 flashes ra-
pidly to indicate that a fault has occurred.
Note:
Refer to data sheet with information on ap-
plying the hot-melt adhesive.
Data sheets and further information are
available at www.steinel­professional.de.
Remedy
Deactivate LOC function.
(See "Other GluePRO 400 LCD
functions")
Let tool cool down.
Switch tool OFF and ON.
Replace heating chamber.
Please contact your service partner.
If the fault is indicated for more than
5 minutes, please contact your service
partner.
- 20 -
Disposal
Electrical and electronic equipment, acces-
sories and packaging must be recycled in
an environmentally compatible manner.
Do not dispose of electrical
and electronic equipment as
domestic waste.

Manufacturer's warranty

This STEINEL product has been
manufactured with utmost care, and its
operation and safety have been tested in
conformity with the current regulations.
Production also undergoes final random
testing.
STEINEL guarantees that it is in perfect
condition and proper working order.
The products comes with a 12-month
warranty, commencing on the date of
purchase by the consumer. We will rem-
edy defects caused by material flaws or
manufacturing faults. The warranty will be
met by repair or replacement of defective
parts at our own discretion. The warranty
does not cover damage to wear parts,
damage or defects caused by improper
treatment or maintenance.
EU countries only:
Under the current European Directive on
Waste Electrical and Electronic Equipment
and its implementation in national law,
electrical and electronic equipment no
longer suitable for use must be collected
separately and recycled in an environmen-
tally compatible manner.
Further consequential damage to other
objects is excluded.
Claims under warranty shall only be
accepted if the product is sent fully as-
sembled and well packed complete with
receipt or invoice (date of purchase and
dealer's stamp) to the appropriate service
centre or handed in to the dealer within
G B
the first 6 months.
1 3
Y E A R Y E A R
MANUFACTURER'S MANUFACTURER'S
WARRANTY WARRANTY
- 21 -