Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Maintenance
•
Check all visible parts and controls for signs of damage at regular intervals and make sure that they all
function correctly.
•
Do not operate the battery-powered tool if signs of damage are found or if parts malfunction. Have the
tool repaired by Hilti Service immediately.
•
After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.com
7 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶ Disposal of electric tools or appliances together with household waste is not permissible.
8 Manufacturer's warranty
▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
9 FCC statement / IC statement
CAUTION This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
frequencies and, if not installed and used in accordance with the instructions, may cause interference to
radio communications.
There is no guarantee that interference will not occur in a particular installation. If this product does cause
harmful interference to radio or television reception, which can be determined by turning the product off and
on, the user is encouraged to try to correct the interference by taking the following measures:
▶ Re-orient or move the receiving antenna.
▶ Increase the distance between the product and receiver.
▶ Connect the product to a power outlet on a circuit other than that to which the receiver is connected.
▶ Consult your dealer or an experienced TV / radio technician for assistance.
Changes or modifications not expressly approved by Hilti may restrict the user's right to operate the product.
This product complies with the requirements in Paragraph 15 of the FCC Rules and RSS 210 of IC.
Operation of the product is subject to the following conditions:
▶ This product should cause no harmful interference.
▶ This product must accept any interference received, including interference that may cause undesired
operation.
10
English
Printed: 29.09.2017 | Doc-Nr: PUB / 5070488 / 000 / 07
These products generate, use and can radiate high
Publicité
Table des Matières
