Indel B SW CUBE 12V Mode D'emploi page 36

SW CUBE 12V
The bottom part of the gasket (F) is equipped with a groove along its entire
length; this should be locked with the top part of the window glass.
Place the gasket (F) against the top part of
the window glass (taking into account what
was mentioned previously), note and cut
following the profile of the window itself.
1
It is advisable to keep the cut parts for
possible future uses (for example on
another vehicle). It is possible to glue the
parts together with suitable glue.
In case "CUBE" must be moved from one
vehicle to another (in case the second
vehicle is a different model than the first
one) it may be necessary to acquire a new
gasket (F) to adjust to the profile of the new
window. For this, please contact INDEL-B.
SW_CUBE_12V_20-02-2019
34