PROGRAMMING INSTRUCTIONS - PROGRAM MODE
Set Start Times
A START TIME is the time of day a program will start running. The EZ Pro
allows three start times per program.
Turn the large dial to the START TIMES position. Press SELECT to select the
start time you want to set (1, 2, or 3). Press ADJUST to set the time of day the
program will start. Repeat as needed.
Start Time Stacking
The EZ Pro
™
Jr. will stack start times if your program watering times overlap
another start time. The additional start time will begin when the first cycle finishes.
Set % Water Budget
% WATER BUDGET changes the duration of run times in a program by the
percentage entered 0 - 200% (i.e., a 10 minute run time at 50% water budget
will run 5 minutes). This feature is useful when changes in weather occur. If it
is unusually dry, you may want to extend your run time for each zone in a
program. With % Water Budget, you can change one number, and all run
times in the program are adjusted. If 24 hours of run time is exceeded 24 hr
will flash on the LCD.
Turn the large dial to the % WATER BUDGET position. A % symbol will appear
on the LCD to let you know you are working on the % Water Budget amount.
Press ADJUST to choose the desired percentage amount.
Jr.
™
15