Reya Dolphin Manuel page 6

For distribution output, we recommend you use a HO7RNF cable.
In order to avoid all risk arising from the incorrect use of this device, please carefully read the list of possible
situations or faults that are not covered by the warranty.
• This device is not protected against reverse battery polarity. Irreversible damage may result.
• If the mechanical components of the device are not protected by the casing and fall, irreversible damage of the
ventilation system and certain electrical components may result.
• Modifications made to the casing (and in particular if holes are bored), may result in the deposit of metallic
shavings or filings onto the electronic card and consequently may cause the malfunction of or damage to the
device.
• Interfering with or modifications made to the electronic card may result in unforeseen operations and
consequently may cause the malfunction of or damage to the device.
• Use of a non-adapted power supply (as a general rule, the input voltage will be too high) may cause the
malfunction of or damage to the device.
• An accidental electrical surcharge or lightening strike will generally cause the malfunction of or damage to the
device.
• Replacement of battery fuses with fuse types other than those recommended (same characteristics) may cause
the malfunction of or damage to the device.
• Obvious connection errors will result in the malfunction of or damage to the device.
• Water gaining access to the interior of the device may cause the malfunction of or damage to the device.
12V10A
Output Cables
Recommended gauge
Max length
Warranty
3 x 0.75 mm²
5 m
6
12V15A