Publicité
Les langues disponibles
Les langues disponibles
• Table 1 – Emulation Selection
Emulation
1-1
1-2
EPSON
OFF
OFF
STAR
OFF
ON
CITIZEN
ON
OFF
EPSON-KP
ON
ON
-EPSON-KP (EPSON Kitchen Printer Mode): Buzzer will sound when the automatic cutting function is
activated or paper is low.
• Table 3 – International Language Selection
Country
DSW1-5
DSW1-6
U.S.A
ON
ON
France
OFF
ON
Germany
ON
OFF
U.K
OFF
OFF
Denmark
ON
ON
Sweden
OFF
ON
Italy
ON
OFF
Windows
OFF
OFF
Code
◈ Self-Test
1. Turn the printer off and close the rear cover.
2. While holding down the FEED button, turn on the printer and continue to hold until the
paper begins to feed. The self-test begins to print the printer settings and cuts the paper and
pauses. (Power indicator lamp blinks.)
3. Press the FEED button to print the rolling ASCII pattern.
4. When the rolling ASCII pattern is printed, the self-test mode automatically ends
※ Note
The self-test lets you know if your printer is operating properly. It checks the print quality,
ROM version, and DIP switch settings.
◈ Specification
Item
Printing Method
Head Pin
Dot Pitch
Dot Pin Diameter
Printing Direction
Character per line
Printing speed *1)
Printing Width
Line Interval
Font
Printer
Character Set
SMPS Input Voltage
Frequency
SMPS Output Voltage
Temperature
Humidity
Mechanism Life *2)
Auto Cutter
Paper Type
Roll Width
Roll Diameter
Paper
Paper Thickness
Paper Weight
Paper Tube (Outer)
Standard
Color
Ribbon
Size
Cartridge
Life
※ Note
*1) Printing speed may be slower depending on the data transmission speed and the
combination of control commands.
*2) The above values are calculated under printing level 2 with recommended paper at
normal temperature. The values may vary with environment temperature, printing level,
etc.
◈ Serial (RS-232C) Fixed Interface Model Windows Driver
Installation: SRP-275A,AG,C,CG (IFC-S TYPE)
1. After running the product installation CD, run the Impact Printer > SRP-275(A/C) >
Drivers > Windows Driver > Drivers Folder > Win SRP-275_Vx.x.x.exe file.
2. In the opening installation window, click on Next.
3. In the Ready to Install the Program window, click on Install.
4. In the Select OS Type window, click on Next.
5. In the Select Port Type window, select one Serial Port and click Next.
6. In the Question window, select Yes and the computer will reboot.
• Table 2 – Transmission Speed (bps) Selection
Epson & Star
Citizen Mode
Transmission
Mode
2-7
2-8
2-5
2400
ON
ON
ON
4800
OFF
ON
OFF
9600
OFF
OFF
OFF
19200
ON
OFF
ON
DSW1-7
Code Page
ON
Page 0 (PC437 : USA)
ON
ON
Page 2 (PC850 : Multilingual)
ON
OFF
Page 5 (PC865 : Nordic)
OFF
OFF
Page 2 (PC850 : Multilingual)
OFF
Windows Code
Details
Serial impact dot matrix
9-pin serial
0.352mm (1/72")
0.3mm (0.01")
Bi-directional (logic seeking) with friction speed
Max 42 (Characters)
5.1 lines/ sec
63.5 mm
4.233 mm (1/6")
7 × 9 / 9 × 9
Alphanumeric Character : 95
International Character : 48
Extended Graphic : 128 × 27 page
100~240 VAC
50 / 60 Hz
24VDC
Operating : 0~50℃ (32~122℉)
Storage : -10~50℃ (14~122℉)
Operating : 10~90% RH (Non-condensing)
Storage : 10~90% RH (Non-condensing)
18,000,000 Lines
1,500,000 Cuts
Paper Roll
76±0.5 mm, 69.5±0.5 mm, 57.5±0.5mm
Max ø83 mm (3.27")
Thickness : 1-ply 0.06~0.085 mm
2
Weight : 52.3~64g/m
(0.115~0.1411 lb)
Max ø19mm (0.75")
RRC-201BR
Black and Red
13 mm (W)
RRC-201BR : 1,500,000 characters (Black)
750,000 characters (Red)
(7×9 font continual printing, ASCII, 25℃)
7. After rebooting, open Start > Settings > Printers & Fax > BIXOLON SRP-275 Icon >
Right-Click > Properties.
8. In the Properties window, select the Port tab and click on the Port Settings. Check to see
2-6
that the information is identical to the self-test results after installation.
ON
ON
OFF
OFF
9. In the Properties window, after selecting the General tab, click on Print Test Page to
confirm that printing is normal.
◈ Parallel (IEEE1284) Fixed Interface Model Windows Driver
Installation: SRP-275AP,APG,CP,CPG (IFC-P TYPE)
1. After running the product installation CD, run the lmpact Printer > SRP-275(A/C) >
Drivers > Windows Driver > Drivers Folder > Win SRP-275_Vx.x.x.exe file.
2. In the opening installation window, click on Next.
3. In the Ready to Install the Program window, click on Install.
4. In the Select OS Type window, click on Next.
5. In the Select Port Type window, select one Parallel Port and click Next.
(Refer to Figure 1.)
6. In the Question window, select Yes and the computer will reboot.
7. After rebooting, open Start > Settings > Printers & Fax > BIXOLON SRP-275 Icon >
Right-Click > Properties.
8. In the Properties window, after selecting the General tab, click on Print Test Page to
confirm that printing is normal.
◈ USB Fixed Interface Model Windows Driver Installation:
SRP-275AU,AUG,CU,CUG (IFC-U TYPE)
1. After running the product installation CD, run the Impact Printer > SRP-275(A/C) >
Drivers > Windows Driver > Drivers Folder > Win SRP-275_Vx.x.x.exe file.
2. In the opening installation window, click on Next.
3. In the Ready to Install the Program window, click on Install.
4. In the Select OS Type window, click on Next.
5. In the Select Port Type window, select USB and click Next. [Refer to Figure 1.]
6-1. If using Windows 98/ME:
①
After completing the installation procedures, reboot the computer.
After rebooting, turn the printer power off and back on.
②
③
After the New Hardware Detected window appears, continue to click Next to install the
USB drive, and then reboot the computer once more.
6-2. If using Windows 2000:
①
After the
Information window appears, turn the printer off and back on and click Yes.
②
After installation is complete, reboot the computer.
6-3. If using Windows XP:
①
After the
Information window appears, turn the printer off and back on and click Yes.
②
After the New Hardware Detected window appears, continue to click Next to install the
USB drive, and then reboot the computer.
※
Note
When the digital registration message appears during installation, click on either OK or
Continue Anyway.
7. After rebooting, open Start > Settings > Printers & Fax > BIXOLON SRP-275 Icon >
Right-Click > Properties.
8. In the Properties window, after selecting the General tab, click on Print Test Page to
confirm that printing is normal.
◈ Ethernet Fixed Interface Model Windows Driver Installation:
SRP-275AE,AEG,CE,CEG (IFC-E TYPE)
Refer to the user manual regarding separate Ethernet interface cards.(Refer to the CD)
◈ WEEE (Waste Electrical and Electric Equipment)
This marking shown on the product or its literature, indicates that is should not be
disposed with other household wastes at the end of its working life, To prevent
possible harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for details
of where and how they can take this item for environmentally safe recycling. Business
users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
☎ BIXOLON Co., Ltd.
● Website http://www.samsungminiprinters.com
● Headquarters
(Add) A-502, Digital Empire, 980-3 Yeongtong-dong, Yeongtong-gu, Suwon-si, South Korea, 443-813
(Tel) +82-31-218-5531
● U.S. Office
(Add) 1210 E. 223rd St., #330, Carson, CA 90745
(Tel) +1-858 764 4581
● Europe Office
(Add) BIXOLON Europe GmbH, Lindenstrasse 169, 40233 Dusseldorf, Germany
(Tel) +49 (0)211 68 78 54 0
SELF TEST
<SRP-275 VER. S01.14-061906>
DIP Switch setup status
Interpreter (DIP1_1,2): Epson
AutoCut (DIP1 _ 3): Disabled
BusyCondition (DIP1 _ 4): Off.L/BF
Memory S/W (DIP1 _ 5): Off
Logo Print (DIP1 _ 6): Off
Near_end (DIP1 _ 7): Disabled
Print Column (DIP1 _ 8): 40
Rx ErrorPrint (DIP2 _ 1): Print ?
HandShaking (DIP2 _ 3): RTS/DSR
Word Length (DIP2 _ 4): 8
Parity (DIP2 _ 5): None
Baud Rate (DIP2_7,8): 9600
Publicité
