MrPEX 5110519 Guide D'installation Rapide page 4

Display
Installer settings. press the
Room
F
MAX
For a full list of settings and operational details, please refer to the
thermostat Installation and Operation Manual 519_D that is available from
www.mrpexsystems.com.
Setting
and
AuxILIARY SENSOR
Select the type of auxiliary sensor. Available when an auxiliary
sensor is automatically detected. NONE = no auxiliary sensor,
ROOM = Indoor Sensor, OuT = Outdoor Sensor, FLOR = Slab
Sensor
ROOM SENSOR
Select if the built-in room temperature sensor is on or off. The
built-in room sensor can only be disabled when an auxiliary
room or slab sensor is connected.
FLOOR MAxIMuM
Set the floor maximum temperature in order to protect the floor
covering. Suggested settings: Tile = 90°F (32°C), Wood Floor =
85°F (29°C)
EScApE
Release the and
All specifications are vsubject
to change without notice
buttons together for 5 more seconds.
buttons to return to the home screen.
4 of 12 519_Q - 04/17