Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7.
critical Settings
The following settings are essential to the successful operation of the heating system.
Press
+
Together
Display
user settings.
F
1-800-716-3406
• Press and hold down both the
seconds to change from one step to the next.
• Release both buttons once the step has been reached.
• Press the
available.
• Press and hold down both the
seconds to go to the next step, OR
• After 15 seconds of no button activity, the display goes
back to normal operation.
Setting
MODE
Select heat or off.
uNITS
Select the temperature units in degree Fahrenheit or Celsius.
BAck LIGHT
Select when the display back light should operate. Options
are Off, Auto, and On. Auto operates the backlight for 30
seconds after a keystroke.
SET FLOOR
Set the floor minimum temperature. Available when an
auxiliary floor sensor is connected and the built-in room
temperature sensor is on.
TYpE
Device Type number. Hold the
version.
EScApE
Release the
and
or the
button to change the setting, if
buttons to return to the home screen.
3 of 12
and
buttons for 3
and
buttons for 3
button to view the software
©2017 MrPEX® Systems 519_Q - 04/17
Publicité
Table des Matières
