Burg Wächter BURGcam BULLET 3040 Guide D'installation Rapide page 46

4. Scan the QR code of the device and check
the input.
5. Enter an individual admin-account
password for the initialisation of the
camera. To reset the device password,
you should also enter the administrator's
mail address. Then tap „Confirm".
6. If the system is to be used with
the BURGcloud P2P connection
for remote access or if you wish
to be informed about automatic updates,
activate the corresponding function and
then tap „Confirm".
Device initialisation is now complete. Keep
the password safe.
46 | English BURGcam BULLET 3040