Publicité
Collision-detection
The system concept provides for collision-related
damage to the equipment to be avoided. If the desk
detects a sudden change in resistance, it stops in
the middle of its movement and returns approx.
50 mm. 25 mm travel can be activated in both
directions.
Standards & Certificates
The entire table has been designed to harmonise
with these standard requirements: EN 527-2:2016
Office furniture - Worktables - Part 2: Requirements
for safety, strength and durability, EN 1730 Furniture
- Tables - Test methods for stability, strength and
durability, ANSI/BIFMA X5.5-2014 - Desk products -
Applicable paragraphs
The colour/surface of the frame is approved
according to standards: EN 12720:2009+A1:2013
Furniture - Evaluation of surface resistance to cold
liquids, EN 15186:2012 Furniture - Evaluation of
surface resistance to scratches
The electronic components are certified according
to: RoHs, Reach, EMC directive, UL962, CHINA
RoHS
Safety regulations
When the desk is tilted up/down, maintain the
required safety clearance to avoid trapping between
the moving tabletop and objects in the surrounding
area.
When moving the desk up and down, the user
should be careful not to hurt anyone or damage any
objects. The tabletop must not knock against a solid
object if it tips over. Always remove all office chairs
before moving the desk up/down.
The table legs must not be altered or reconstructed
in any way. The power cord must always be
disconnected from the wall socket during service
and repair work on the desk. Modifications to
the legs are absolutely forbidden. Under no
circumstances may the desk be used as a lifting
device for persons.
Maintenance and repair instructions
• After about 1 week of use, check that the screws
are still properly tightened.
• If the desk cannot be lowered or raised, check
the connections between the control box and the
power outlet.
• If part of the electrical system is to be replaced,
first unplug the electrical cable from the socket.
Replace the electrical part and then reconnect
the electrical cable to the socket. The desk is now
ready for use.
Service & Warranty
Do not attempt to repair this product yourself as
opening or removing covers may expose you to
dangerous voltages or other hazards and will lead
to an immediate end of our warranty. Our warranty
covers 2 years beginning with delivery.
KARE DESIGN GmbH
Zeppelinstr. 16
D 85748 Garching - Hochbrück
The crossed-out dustbin symbol indicates that the item must be
disposed of separately from household waste. The item should
be disposed of in accordance with local regulations.
environmental regulations for waste disposal for recycling. By
separating a marked object from household waste, you help
reduce the amount of waste in incinerators or landfills and
minimise possible negative impacts on human health and the
environment. For more information, please contact your KARE
customer service representative.
21
Publicité
