3
OPERATING THE URC
Normal Operation
Once you have set up the URC for your A/V equipment, it works like your origi-
nal remote controls. To operate, just aim it at your equipment, press an appro-
priate device mode key and invoke the desired function by pressing a corre-
sponding key on the URC. The indicator flashes during signal transmission and
as confirmation of key touch.
Punch Through
Punch through allows you to operate TV's volume and mute functions without
having to switch the device modes repeatedly even when your URC is in other
operating modes.
4
ADVANCED OPERATION
Secondary Function
Symbols of secondary function are printed in different colors on the panel,
and a SECONDARY FUNCTION TABLE is included in the interior page of the
coversheet. To invoke a secondary function, press
sponding function key.
5
MAINTENANCE
1. Do not expose your URC to dust, strong sunlight, humidity, high temperature
or mechanical shock.
2. Do not use old and new batteries together as old batteries tend to leak.
3. Do not use corrosive or abrasive cleansers on your URC.
4. Keep the unit dust free by wiping it with a soft, dry cloth.
5. Do not disassemble your URC, it contains no user-serviceable parts.
6
TROUBLESHOOTING
Q. My URC does not work at all!
A. Check your A/V device, if the device's main switch is turned off, your URC
could not operate your device.
A. Check whether your batteries are inserted properly and are in correct +/- marks.
A. Check whether you have pressed the corresponding device mode key for
your device.
A. If the batteries are low, replace the batteries.
Q. If several Device Codes listed under the brand of my A/V device, how can I
select the correct Device Code?
A. To seek the correct Device Code for your A/V device, test the code one by
one until most keys work properly.
Q. My A/V equipment responds only to some of the commands.
A. You have set a code for which only some commands work properly but some
do not. Try other codes until most keys work properly.
9
English
SHIFT
followed by a corre-