Setting Up The Tv; Selecting A Good Location - HP LT4700 Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8 8
HP recommends professional installation from an authorized installer to ensure maximum enjoyment of your HP HDTV.
Be sure to read all the safety information and precautions before starting installation. See the following topics:
"Important Safeguards" on page iii
"Important Safety Instructions" on page v
"Important Information" on page viii

Selecting a Good Location

When selecting the location for your HP HDTV,
consider the following conditions:
Power cord length: Choose a location with easy
access to an AC power outlet.
Cable lengths and distances to attached units:
Check that cables can reach the TV.
To view high-definition programming, you
must have a high-definition signal source,
such as an off-the-air high-definition
antenna or cable HD signal, a cable or
satellite provider HD set-top box, or a
HD-DVD player, connected to the TV. All
sources except a HD antenna or cable HD
signal, must connect to one of the High
Definition Input connector sets on the TV.
Do not install the TV on an unstable cart or stand;
the unit may fall over and cause injury.
Do not install the TV where it has a protruding
edge, such as on a small table where the display
overhangs the table surface.

Setting Up the TV

Do not hang the TV from the ceiling; the unit may
fall and cause injury.
Avoid direct sunlight that may damage the display
or interfere with the operation of the remote
control.
Avoid areas of high humidity or damp conditions
that may cause fire or electrical shock.
Do not install TV near appliances, such as a
microwave, or near a heat source, such as a
fireplace or radiator.
Do not place the TV on a sloped or unstable
surface.
Provide a minimum of 4 inches (10 cm) of
ventilation clearance around the TV.
Wall-mounting: Your TV can be wall-mounted by
using an HP-approved wall-mounting kit (sold
separately):
LCD TV Flat Mount, Model PY043AA#ABA
LCD TV Tilting Mount, Model PY044AA#ABA
Remove the TV stand; see "Attaching or removing
the stand" on page 8. Then follow the installation
instructions provided with the wall-mounting kit. HP
recommends professional installation if you want
to wall-mount your TV.
7
Setting Up the TV

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lt4200Lt3700Lt3200

Table des Matières