Machine Symbols - Garland PRESS 191 CE Manuel D'instructions

not use this pump to pump other liquids different to
clean waters such as sea water, dirty water, petrol,
oils, solvents, food liquids (milk, soft drinks, etc) or
residual waters. This machine is for private domestic
use in domestic water installations and domestic
watering systems.
This machine is for private use in domestic water
installations, watering systems or similar installations.
It has not been designed for continuous use.
Do not allow the machine to work with no water
as there is a clear risk of breakage. Be vigilant that
the suction tube is always inside the water when
pumping.
Use this machine and its accessories following the
instructions and use taking into account the job to
be done. The use of this machine for jobs it has not
been designed to do can be the cause of dangerous
situations.
Never use this machine if any part of the machine
is damaged.
Check that all security elements are in good working
order at all times.
The manufacturer will not be liable for damages
caused through the incorrect usage of the machine.
Do not overload the machine. Use the machine for
its correct usage. If used correctly the machine will
do the desired job.
Look after the machine. Check that all moving parts
are well aligned and that they are not blocked, that
there are no broken pieces or other conditions that
could affect the proper functioning of the machine.
If this machine is damaged, always repair it before
using it again. Most accidents occur because of poor
maintenance.
If the machine starts vibrating in a strange way,
disconnect the machine and examine it. If you
cannot detect why the machine vibrates, take the
machine to your nearest service dealer. Vibrations
are always an indication of a problem to the machine.
Unplug the machine before carrying out any
maintenance work, change of accessories or before
storing the machine. All these measures ensure that
the machine will not be accidentally started.
2.6. MAINTENANCE
Take your machine for periodic revision to a
qualified after sales dealer and only use original
spare parts and accessories. This will guarantee that
the security measures of this electris machine can
always be complied with.

3. MACHINE SYMBOLS

To guarantee a correct use and maintenance of this
machine, you will find the following symbols on the
machine.
ON/OFF switch:
Open position.
Closed position.
21/76
English