Selecting The Menu Items; Setting The Menu Items; Accepting The Setting; Ending The Programming - Crouzet CTR48 Notice De Mise En Service

6.4 Selecting the menu items

The Prog/Mode key is used to
select a menu item within the
sub-menu.

6.5 Setting the menu items

The T2 key is used to select
the individual settings for the
menu items
When setting count values,
each decade has a key as-
signed to it. Each time the key
is pressed, the value incre-
ments by one

6.6 Accepting the setting

Pressing the Prog/Mode key
causes the current setting to
be accepted. Programming
then switches to the next
menu item.

6.7 Ending the programming

During programming, it is possible to exit
the programming at each menu item by
pressing the reset key.
Press the Reset key
¶ The security prompt ap-
pears in the display
Pressing the Prog/Mode key
acknowledges this prompt and
causes the programming
menu to start again from the
beginning. The previously-pro-
grammed values are pre-
served. These can now be
changed or checked again.
Pressing the decade key T2
selects the termination of the
programming
¶ The security prompt ap-
pears in the display
Pressing the Prog/Mode key
acknowledges this prompt and
terminates the programming;
the modified settings are
saved in the EEPROM.
¶ The text SAVE is displayed
for 2 s

6.8 Programming Menu

6.8.1 Factory setting

Menu for resetting the
counter to the factory setting
Do not reset the counter to
the factory setting
Reset the counter to the fac-
tory setting
¶ The text F.SEt is displayed
for 2 s
Factory settings are high-
lighted in grey

6.8.2 Setting the Basic Function

Main menu Basic function
Pulse counter
(6.8.3)
Timer/Hour meter
(6.8.4)
Tacho/Frequency meter
(6.8.5)
6