How This Thermometer Measures Temperature; Control Displays And Symbols; Directions For Use - Marque Verte Digifront COMPACT Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

cases where you suspect this to be unavoidable, please verify if
the device is working properly before use.
WARNING: Use of this instrument is not intended as a sub-
stitute for consultation with your physician. This instrument
is NOT waterproof! Please NEVER immerse into liquids.

3. How this Thermometer measures Temperature

The thermometer measures infrared energy radiated from the skin
above of the eyebrow area and the surrounding tissue. This energy
is collected through the lens and converted to a temperature value.
Temperature readings obtained by scanning above the eyebrow area
will provide the greatest accuracy.

4. Control Displays and Symbols

• All segments displayed ⑥ : Press the «ON/OFF» button ④
to turn on the unit, all segments will be shown for 2 seconds.
• Memory ⑦ : The last reading will be shown on the display
automatically for 2 seconds.
• Ready for measurement ⑧ : The unit is ready for measure-
ment, the «°C» or «°F» icon will keep flashing.
• Measurement complete ⑨ : The reading will be shown on
the display 3 with the «°C» or «°F» icon flashing, the unit is
ready again for the next measurement.
• Low battery indication ⑩ : When the unit is turned on, the
battery icon will keep flashing to remind the user to replace the
battery.

5. Directions for Use

1. Press the «ON/OFF» button ④. The display ③ is activated to
show all segments for 2 seconds.
2. The last measurement reading will be shown on the display
automatically for 2 seconds with the «M» icon ⑦.
3. When the «°C» or «°F» icon is flashing, a beep sound is heard
and the thermometer is ready for measurement ⑧.
4. Place the probe gently onto the area approximately 1cm above
the center of the eyebrow (skin contact is necessary). If the eye-
brow area is covered with hair, sweat or dirt, please remove the
obstacle beforehand to improve the reading accuracy.
5. Press the «START» button once and release it. Start to move
the instrument steadily from 1 cm above the center of the eye-
25

Publicité

Table des Matières
loading

Produits Connexes pour Marque Verte Digifront COMPACT

Table des Matières