Initial Setup; Clock Setup - Crosley CR612B Manuel D'utilisation

English

Initial Setup

Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Remove the plastic bag covering the radio.
3. Press Open to open the CD Door.
4. Remove the cardboard shipping card from the CD Player.
5. Unwind FM Antenna and allow it to hang straight down.
6. Remove plastic bag covering the AC Power Cord.
7. Untie the AC Power Cord at the back of the unit.
8. Remove plug safety cover on the prongs of the plug.
9. Plug the AC cord into an appropriate outlet
Battery Backup
This Model includes a battery back-up circuit. The battery will maintain the clock
and alarm settings in the event of a power failure. The battery back-up requires
one 9V battery (not included). To install/replace the battery,
follow the instructions below.
1. Press in on the locking tab to remove the battery cover.
2. Attach a 9V battery to the battery contacts as shown.
3. Tuck the battery back into the battery compartment and
replace the battery cover.

Clock Setup

Setting the Clock
1. Press the Time button twice, and the hour digits will start flashing.
2. Press the Backward or Forward Skip buttons to adjust the hour while the
digits are flashing.
3. Press the Time button, and the minute digits will start flashing.
4. Press the Backward or Forward skip buttons to adjust the minute while the
digits are flashing.
5. Press the Time button to set the clock.
6. Long press the Time button to switch between 12 and 24 hour mode.
5