Use - Krüger Technology KKH20015CP Mode D'emploi

Starting stages
1. Open the water supply cock (A).
2. Open the gun and keep it open for a few seconds to allow the air in the
pipes (B) to come out.
CAUTION: Grip the lance and the gun firmly with both hands.
3. Turn the start switch (C) into position (1) for cold use or into position (2)
for warm use keeping the gun open.
4. In case of warm use turn the knob (D) round to the temperature required.
Stages to turn the machine off
1. Set the temperature switch (C) to 0° and wait about 30" to clean the
boiler.
2. Turn the off switch (A).
3. Open the spray gun (B) and hold it open for a couple of seconds so that
the water in the line drains out.
4. Turn the off switch (C) into position 0 (Zero)
5. Close the spray gun (B).
6. Disconnect the machine from the electric supply by removing the plug
from the power socket.
The machine does not work if the fuel reservoir is not filled with at
A
B
least 6 litres of gas oil (Diesel).
KH14011CP/KH17013CP/KH20015CP

USE

C
WARNING :
25
C