Overflow Drain Line Installation - Avanti CK3616 Manuel D'instructions

Overflow Drain Line Installation

•
The molded end of the waste drain must fit the connections on the waste tee and overflow
adapter.
•
Connect the waste tee with overflow adapter to the waste drain hose and secure drain hose to
the waste tee and overflow adapter with clamps. The connection must be performed by a
professional licensed plumber and comply with all Local Codes and Ordinances. See Figure No.
6.
Figure No. 6
Installation of the Refrigerator
NOTE: The refrigerator is supplied with a separate instruction manual. Please review prior to
final installation of your Compact Kitchen.
•
Disconnect the power supply. Failure to disconnect the appliance could result in electrical shock
or personal injury.
•
Connect the Refrigerator power supply cord to the receptacle in the junction box located at the
back of kitchen cabinet under the countertop as shown in Figure No. 7.
•
Slide the refrigerator into the kitchen cabinet by slightly lifting the rear part of refrigerator. Make
sure the power supply cord is not kinked or damaged under the refrigerator.
•
Secure refrigerator leveling legs in place using the bottom bracket notches as shown in Figure
No. 7.
Figure No. 7
BOTTOM BRACKET WITH2 NOTCHES
TO SECURE REFRIGERATOR IN PLACE
(SOPORTE DE METAL CON2 APERTURAS
PARA FIJAR EL REFRIGERADOR EN SU
LUGAR)
11
JUNCTION BOX