Colour Temperature; Additional Functions; Power Requirements - Broncolor Scoro Serie Mode D'emploi

Control range for flash energy

Colour temperature

Modelling light

Additional functions

Flash release
No. of sync sockets
Computer connection for
remote control (RFS only)
Stabilised flash voltage

Power requirements

WiFi
Dimensions without handle
Weight*
* incl. dust protection cover, power cord and manual
over 10 f-stops
in 1/10 or whole f-stop intervals. LCD display in joules / percentage
ECTC technology (Enhanced Colour Temperature Control) for
constant or specifically adjustable colour temperature
Halogen max. 3 x 650 W at 200 – 240 V (see page 9)
Halogen max. 3 x 300 W at 100 – 120 V
Proportional to flash energy, also full and low settings
Proportionality can be adapted to other broncolor power packs
and to monolights
t 0.1, sequence, delay, interval, colour temperature, alternating,
stroboscopic, memory and many more
Manual release button, photocell, infrared, RFS 2 receiver
(may be switched off), sync cable, IRX 2
1
1
+/– 0.3 %
230 V
16.0 A
120 V 15.0 A
100 V
15.0 A
802.11 b/g/n, Encryption: Open/WPA/WPA2
28.8 x 19 x 29.5 cm
11.3 x 7.5 x 11.6"
9.8 kg / 21.6 lbs
over 11 f-stops
1
1
+/– 0.3 %
16.0 A
15.0 A
15.0 A
28.8 x 19 x 40 cm
11.3 x 7.5 x 15.7"
12.8 kg / 28.2 lbs
31