Repeat Playback; Intro Play; Random Play; Program Play - Roadstar PCD-498MP Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

3
English

REPEAT PLAYBACK

1. Press the PLAY/PAUSE button (2).
2. To repeat the same track, press the MODE button (7) once during PLAYBACK.
"REP 1" will appear on the display. CD will start single track repeat playback until
STOP button (3) is pressed. Press the MODE button (7) 5 times to cancel single re-
peat. The 'REP 1' indicator disappears from the display.
3. To repeat the entire ALBUM, press the MODE button (7) twice. "REP ALL" will ap-
pear on the display. Press the MODE button (7) 3 times to cancel all Album repeat.
The 'REP ALL'' indicator disappears from the display.
4. To repeat the entire MP3 disc, press the MODE (7) button (6) three times. "REP
DIR" will appear on the display. Press the MODE button (7) 3 times to cancel all
disc repeat. The "REP DIR" indicator disappears from the display.

INTRO PLAY

1. Press the PLAY/PAUSE button (2).
2. Press the MODE button (7) 4 times to enter the Intro mode, 'INT' appears on the di-
splay.
3. Press PLAY, the CD start play the first 10 seconds of each track of each album on
the CD.
4. Press MODE button (7) twice more to cancel Intro playback and resume normal
playback.
5. Power is turned off automatically after 60 seconds, when all tracks have been
played.

RANDOM PLAY

1. Press the MODE button (7) 5 times to enter the Random mode. "RND" appears on
the display, then the CD start playback of all tracks of all albumsin Random order.
2. Press SKIP button to go to next Random track.
3. Press the MODE button 2) once more to return to the Normal Playback mode.

PROGRAM PLAY

1. Press the PLAY/PAUSE button (2) and after 8 seconds the STOP button (3).
2. Press the PROG button (6), the following will appear on the display: (00 000 P-01)
and the Album no. will flash.
3. Press the SKIP Forward and Backward (10,7) buttons to select the desired Album to
be programmed.
4. Press the PROG button (6) once to enter the Album into memory. The Album num-
ber will stop flashing and the track number will start flashing.
5. Press the SKIP Forward and Backward (10,7) buttons to select the desired track to
be programmed.
6. Press the PROG button (6) to select the desired track to be programmed.
7. Repeat the steps 3 to 6 to program up to 24 tracks.
8. Press PLAY/PAUSE button (2) once to start programmed playback.
9. To cancel programmed playback, press the STOP button (3) twice.

Publicité

Table des Matières
loading

Table des Matières