Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. Turn on your TV.
2. Press & hold the SET
key and press the TV
once. At this time, the red LED light will light on.
3. Release the SET
key and TV
4. Press the SET
key once again, the red LED light will
flash continuously.
5. Aim the BC-08E at your TV.
6. Now, press & release POWER
turns off. This indicates that the BC-08E is now set to
your TV.
HINT : During the Manual Search mode, you can use the
SET
key as forward/backward toggle switching to
locate the correct code of your TV in a quick way.
7. Press the [Device] key once. The red LED will go out auto-
matically. The BC-08E is now ready to operate your TV.
8. To check the code, press POWER
Press CH+/-, VOL +/-,
, and other applicable keys. If
no function, repeat Steps 1-8.
9. To program other equipment, repeat the Steps 1-8 for
your VCR and or SAT.
NOTE 1 : For VCR, press & release either POWER
or
key. .
NOTE 2 : To leave the MANUAL SEARCH during the code
searching, just press any of the [DEVICE] key once.
Otherwise, if no code is entered within 10 seconds, the
red LED light will go out automatically.
PUNCH THROUGH
It allows you to operate TV's VOLUME and
simultaneously without having to switch the device modes
repeatedly. You can adjust the TV sound source while you
are operating the VCR or Satellite Receiver. Right at your
fingertips.
TELETEXT
The function of TELETEXT should operate exactly as your
original remote.
PREPROGRAMMED CODE DISPLAY
This method displays its 3-digit preprogrammed codes that
will operate your equipment. You can control the display of
each position in an easy way. For example, press key
1
st
digit of code, press key
for 2
key
for 3
rd
digit of code. .
1. Select the desired [DEVICE] key.
2. Press & hold the SET
key, then press the desired
digit code you want to display.
3. Release the SET
key. .
4. The red LED will flash in accord to the count of digit code.
(No flash for digit 0).
5. Repeat Steps 2-4 for next display.
TECHNICAL SPECIFICATIONS
Communication Mode :
Infrared
Power Requirement :
3V ( 2 x AAA, IEC-LR3,
UM-4 size alkaline batteries)
Effective Range :
7M, ±20 degrees
Max. Operating Temperature : 0˚C to +50˚C
Max. Storage Temperature :
-25˚C to +125˚C
Dimension :
63(W) x 28(H) x 173(L) mm
Weight (without batteries) :
56.2g.
2
key ey
key. y.
key until the TV
to ON position.
function
for
nd
digit of code and press
Publicité
Table des Matières
