Remote Control - AVer VB342 Pro Mode D'emploi

Remote Control


SmartFrame (
one time. Press and hold the button for 1~2 sec to switch from manual to auto framing mode or Off.

Audio AI Control (
tracking, Presentation mode, Audio fence and Off.
[Note] Audio AI function supports up to

Bluetooth ( ): Hold it for 1~2 sec to enable Bluetooth pairing with mobile
FONE540 speakerphone.
[Note] BT dongle is an optional item. Please contact your local dealer for purchasing.

Enter ( ): Press it to show the current AI function on screen such as Auto
pressing this button, it will also force camera to do manual focus for once at the same time.
 )
OSD Menu (

Load Preset Hotkey (

Number 0~9: Long press the number button to set preset point. One-click the number key to load
preset point.

WDR: Press

Set preset: Press

RTMP: Press

Sleep mode: Press
streaming, this function won't work.
): One-click automatic field of view adjustment
): Press and hold the button for 1~2 sec to switch modes among Audio
7~8
Short press it again to disconnect Bluetooth.
: Short press to pull out gesture control guide
): Press it to move to preset position as user has set in sequence.
then to enable/disable the WDR function.
then to enable/disable Set preset function
then to enable/disable the RTMP streaming function.
then to force camera to enter sleep mode. If there is USB
[Note] AAA batteries required
meters away from camera.
English-5
to fit all participants in screen for
phone or AVer
Framing. When